Output
1 kW ~ 6 kW
Models
5 models
Cladding lasers // CLADDING
LS-CLAD-M
Cladding and additive manufacturing laser
Building up, not cutting away. Powder or wire is melted into a layer on the surface. Wear and corrosion repair and metal additive manufacturing use the same laser.
SPECIFICATIONS
Specifications
| Item | Value | Unit | Condition |
|---|---|---|---|
| Average power | 1000 ~ 6000 | W | Series range |
| Centre wavelength | 1080 ± 1 | nm | |
| Operating mode | CW / modulated | ||
| Beam quality | 2 ~ 30 | BPP mm·mrad | By core diameter |
| Fibre core diameter | 50 ~ 600 | μm | Made to order |
| Cooling | Water-cooled | ||
| Power supply | 340 – 420 three-phase | VAC | 50 / 60 Hz |
| Control | RS-232 / Ethernet · analogue 0 – 10 V | ||
| Operating ambient temp. | 10 ~ 40 | °C |
MODELS
Models
| Models | Average power (W) |
|---|---|
| LS-CLAD-M-1000 | 1000 |
| LS-CLAD-M-2000 | 2000 |
| LS-CLAD-M-3000 | 3000 |
| LS-CLAD-M-4000 | 4000 |
| LS-CLAD-M-6000 | 6000 |