PRODUCTS
Lineup
Industrial lasers, supplied under the LEWS brand. Series are divided by what the laser does — by role, not by pulse regime.
The same laser appears under several roles — a 3 kW CW source serves cutting, welding and cladding alike. You will therefore meet one series in more than one place.
Cutting lasers // CUTTING
Cutting lasers
Beam quality makes the cut edge. Output covers everything from thin sheet to heavy plate.
| Series | Description | Output | Models |
|---|---|---|---|
| LS-CUT-S | Single-module cutting laser | 1 kW ~ 12 kW | 9 models |
| LS-CUT-M | Multi-module cutting laser | 6 kW ~ 85 kW | 10 models |
| LS-CUT-F | Fundamental-mode precision cutting laser | 500 W ~ 3 kW | 5 models |
| LS-CUT-A | Air-cooled thin-sheet cutting laser | 200 W ~ 750 W | 4 models |
Welding lasers // WELDING
Welding lasers
Melt and join. Beam geometry governs spatter and cooling rate.
| Series | Description | Output | Models |
|---|---|---|---|
| LS-WELD-S | Single-module welding laser | 500 W ~ 6 kW | 7 models |
| LS-WELD-D | Dual-beam welding laser | 1 kW ~ 6 kW | 6 models |
| LS-WELD-R | Composite-beam welding laser | up to 8 kW + 8 kW | 3 models |
| LS-WELD-Q | Quasi-CW spot welding and drilling laser | avg. 75 W – 1 kW · peak 750 W – 2 kW | 3 models |
Marking lasers // MARKING
Marking lasers
Marks that do not rub off. Pulse width and repetition rate define their character.
| Series | Description | Output | Models |
|---|---|---|---|
| LS-MARK-M | MOPA marking laser | 20 W ~ 500 W | 9 models |
| LS-MARK-Q | Q-switch marking laser | 20 W ~ 200 W | 5 models |
| LS-MARK-N | Short-pulse marking laser | 5 W ~ 20 W | 4 models |
Cleaning lasers // CLEANING
Cleaning lasers
Strip coating, rust and release agent — and nothing else. The substrate stays untouched.
| Series | Description | Output | Models |
|---|---|---|---|
| LS-CLEAN-H | High-power nanosecond cleaning laser | 500 W ~ 6 kW | 3 models |
| LS-CLEAN-G | Green nanosecond cleaning laser | 300 W | 1 models |
Cladding lasers // CLADDING
Cladding lasers
Build up instead of cutting away. Wear repair and metal additive manufacturing share the same laser.
| Series | Description | Output | Models |
|---|---|---|---|
| LS-CLAD-M | Cladding and additive manufacturing laser | 1 kW ~ 6 kW | 5 models |
Micromachining lasers // MICRO
Micromachining lasers
Machining with no heat-affected layer. The shorter the pulse, the cleaner the edge.
| Series | Description | Output | Models |
|---|---|---|---|
| LS-MICRO-P | Picosecond micromachining laser | 0.5 W ~ 75 W | 10 models |
| LS-MICRO-F | Femtosecond micromachining laser | 100 mW ~ 50 W | 3 models |
| LS-MICRO-E | High-energy nanosecond laser | up to 2 J @1064 nm |